|
Specifications
 Helps Prevent Broken Pipes and Conduit |
Interrupts the power to a rotary hammer drill instantly when the drill
bit encounters grounded metal pipes, conduit, or reinforcement steel.
Excellent for use when drilling concrete slabs or walls during termite work or
construction activities. |
| Tested and Inspected |
Each PROTEK undergoes thorough factory inspection and testing before
shipment. |
| Easy To Use |
Ground and Trip indicator lights.
Plug drill into PROTEK, test against grounded metal pipe, and start drilling. |
| Built-In Ground Fault
Circuit Interrupter for Improved Operator Safety. |
OSHA recommends that a GFCI be used when operating power tools. |
| Rugged Design |
Sturdy cast aluminum housing.
Extra-heavy-duty circuitry
Rated at 13 amps, 115 volts, AC
Approximately 7.5" x 4.5" x 3"
Weight: 4 pounds |
| One Year Warranty |
-- Control Loop --
When the drill bit encounters grounded metal, the Control Loop is
completed (closed), and the PROTEK stops power to the drill. All segments of the Control
Loop must be in place for the PROTEK to function properly. If the Control Loop is
interrupted at any point, the PROTEK will not shut off power to the drill when the drill
bit encounters grounded metal.
A schematic diagram and
replacement parts list is available on
our support page.
(888) 658-8030 - Technical Support
|
